Water TechniX Calcium Up Hardness Increaser 4Kg – Pool Chemical Water TechniX

Protect your pool surfaces from corrosion with Water TechniX Calcium Up! Whenever your calcium hardness levels drop below 200, use some Water TechniX Calcium up to bring up those levels up to 200-500ppm so that your water won’t “eat” the calcium from your pool’s surfaces.

Used to raise calcium hardness levels in pool water. Protects all pool surfaces and equipment from etching and corrosion. Necessary to maintain calcium hardness levels after rain and during winter months.

Rapid dissolving and minimal residual across all Water TechniX chemicals make It easy to see why the range of Water TechniX chemicals are used by pool professionals and DIY experts alike! Make the switch to Water TechniX chemicals and watch your pool sparkle.

Benefits:

• Increases calcium hardness levels in pool water
• Prevents etching of pool surfaces
• Prevents erosion of heating elements and equipment
• Extends life of vinyl liners
• Simplifies your pool care and reduces sanitizer demand by removing dirt particles. Keep your pool water clear and ready for fun all season long!
• Easy to follow label instructions and apply to your pool accordingly. Always ensure safety protection is worn and contact us if you are unsure of correct applications.
• Effective for all swimming pool types including concrete, vinyl, tiles and fiberglass. Also Ideal for salt water pools
• Effective at varying temperature levels & with a  range of other chemical levels
• Use with all filter types – *ensure cartridge filters are regularly cleaned to avoid congestion. 

 

Features:

• Increases the level of calcium in swimming pools and spas
• Will attempt to dissolve anything it comes into contact with until it reaches it’s desired hardness level
• Prevents damage caused by improper water balance
• Assists in maintaining the Calcium Hardness level within the correct ranges of 200- 500ppm 
• Essential for water balance
• Helps protect pool surfaces and equipment
• Follow the directions on the label
• 4Kg
• Made in Australia
• 990g/1000g CALCIUM CHLORIDE

 

Product Use and Application:

Water TechniX Calcium Hardness is a product designed to raise the calcium hardness level in pool and spa water.

Maintaining correct calcium hardness levels in pool and spa water will ensure continued protection of pool surface finishes and equipment.

Calcium hardness levels are an integral part of the saturation index and should be checked and addressed when necessary.  All pool surfaces require calcium hardness for correct water balance, particularly when the water temperature is cooler.

The total calcium dose required, should be applied to pool and spa water in small increments of approximately one third at a time, and never added via the skimmer box.

 

Dosage Rates:

100gm / 10,000 litres will raise the calcium hardness level 10ppm