Lo-Chlor Leak Sealer 1L – Pool Chemical Lo-Chlor

LO-CHLOR Leak Sealer 1L

An advanced Liquid Formulation For SEALING MINOR CRACKS & LEAKS in both PIPE WORK and POOL SURFACES

Benefits

• Seals minor leaks in most swimming pools & spas
• Can seal leaks losing up to 3.5cm of water per day (in a 50K litre pool)
• No need to empty pool or spa
• Fast acting – usually stops leaks in 24 hours

 

Important Notes

• NOT suitable for repairing leaks in vinyl liner pools
• Larger defects require proper plumbing and maintenance
• If using an automatic pool cleaner, remove the cleaner from the pool
• Do not allow Leak Sealer to pass through filtration system
• Do not exceed recommended dosage rate

 

Dosage

• 1LT treats 50,000 Litres pool water

 

What is Lo-Chlor Leak Sealer?

Lo-Chlor Leak Sealer is a compound that has been developed to help seal minor cracks and leaks in swimming pools. A leaking pool is every pool owner’s nightmare. Lo-Chlor has developed an easy way to plug minor leaks.

How does Leak Sealer work?

Leak Sealer has a very high pH (about 12) so when you add it to your pool it takes on the pH of pool water (between 7.0 and 8.0). It now no longer functions as a liquid and starts to solidify in the presence of oxygen at the site of the leak. To ensure best results, please follow the instructions on the label.

Leak troubleshooting

Please follow the below steps and if all fails it may be best to call in a local service technician or specialist leak locator:

1. Ensure the pool water level is topped up.
2. Disconnect the pool cleaner from the skimmer box or suction line.
3. Inspect the pump, inspect all o ring for grit etc. and that the o rings are seated correctly, unions are done up tight. Also inspect the pump for cracks / damage.
4. Check the filters, same again. Ensure all o ring are seated correctly, that there is no grit, unions are nice and tight and there is not cracks, splits or damage.
5. Then the chlorinator, same again, check all o rings, ensure unions are tight and there is no cracks etc.
5. Inspect any other components that are installed with the plumbing.
6. Grease all rubber seals with a good quality silicone based lubricant.
7. Replace any of the above as required.
8. A leak sealer is worth every cent before outlaying the expense of calling in a professional, depending on the leak size repeat doses may be required.

Did you know…?

• Lo-Chlor Leak Sealer is sold in more than 25 countries around the world.
• Lo-Chlor Leak Sealer is the fastest selling and most popular specialty pool and spa chemical in Spain and France.
• Lo-Chlor Chemicals distributes more than 20,000L a year of Leak Sealer to all corners of the globe.