Water TechniX Stain Remover 1Kg – Brown Rust Pool Chemical Water TechniX

Sometimes elbow grease isn’t enough to remove tough stains from your pool. The Water TechniX Stain Remover melts away almost any type of pool stain while staying gentle enough not to harm your pool surfaces.

A multi-purpose stain remover that is a blend of organic acids used for removing coloured metal stains from pool surfaces, including iron, copper and manganese. Designed to treat entire pool surface but can also be used to spot treat individual stains.

Rapid dissolving and minimal residual across all Water TechniX chemicals make It easy to see why the range of Water TechniX chemicals are used by pool professionals and DIY experts alike! Make the switch to Water TechniX chemicals and watch your pool sparkle.

Benefits:

• A multi-purpose stain remover.
• Removes coloured metal stains from surfaces.
• Granular product that can be used to spot treat small stains.
• Effective in removing iron, copper and manganese stains.
• Easy to follow label instructions and apply to your pool accordingly. Always ensure safety protection is worn and contact us if you are unsure of correct applications.
• Effective for all swimming pool types including concrete, vinyl, tiles and fiberglass. Also Ideal for salt water pools
• Lower pool chlorine levels prior to use, high chlorine could make pool slightly cloudy.
• Use with all filter types – *ensure cartridge filters are regularly cleaned to avoid congestion.

 

Features:

• Tough stain removal
• Removes most stains from pool surfaces.
• Superior stain removal
• Ideal for all types of stains
• Effective on rust and iron stains
• Removes Blackspot stains
• Follow the directions on the label
• 1Kg resealable jar
• Dosage Rate: 1kg per 50,000L
• Made in Australia

• 980g/kg Organic Acid Blend

 

Product Use and Application:

Water TechniX Multi Stain Remover can be used as an all over treatment for metal stains, but will result in a reduction of pH and total alkalinity of pool water. Care should be taken when rebalancing water to prevent cloudy water or precipitation of the original stain. If adding Evopure pH Buffer, it is advised to do so slowly.

When spot treating a localised stain, a small amount of product can be put into a skimmer sock and held over the affected area.

Do not broadcast or spot treat Stain Remover directly onto bleachable surfaces such as vinyl liners or painted pools.

High levels of chlorine will reduce the activity of Evopure Multi Stain Remover, therefore a reduction in chlorine levels to below 1.0 ppm prior to treatment is recommended.

Dissolve required quantity in at least 10 litres of water first before adding to swimming pool.