Spa Electrics LED Pool Light Retro EMRX Blue Spa Electrics

Looking to add a crystal blue hue to your pool? The Spa Electrics LED Pool Light Retro EMRX Blue is an ECO-friendly way to light up your pool without spending hundreds, if not thousands of dollars on electricity for your pool lighting needs. 

Spa Electrics is the leading manufacturer for underwater LED lights to suit both commercial and domestic pools and spas. The range of Spa Electric LED pool lights are designed and manufactured here in Australia with Mr Pool Man a leading distributor of the premium LED lights.

Spa Electrics LED lights offer peak performance, easy operation and is quick to install, Retro fitting 99% of existing surface mount pool lights within 20 minutes! Works with existing transformers and includes detailed installation instructions Suitable for all residential and commercial applications.

Features:

• High intensity Ceramic Light Engine (LED) Technology
• Simple Installation. Upgrade to LED in as little as 20 minutes
• No electrician required. Extra Safe Low voltage.
• Variable Voltage Operation on all 12, 24 & 32v AC Transformers
• Designed and manufactured in Australia
• Spa Electrics LED lights use around 88% less energy than standard halogen lights
• The LED Spa Electrics light will improve the look of your pool, and it will slash your electricity bill
• Smaller profile light widely used on vinyl, fiberglass pools and spas 
• Niche mounted , sits almost flush to the wall 
• RM2 remote compatible ( additional purchase )

Easy Installation Notes:

Installing or upgrading your current pool lighting system can be done in as fast as 15 minutes per light fixture!

• To be completely safe, turn off the mains to everything connected to your pool. 
• Ensure that your power supply is currently outputting 12v. If not, you will need a pool LED light transformer.
• Unmount your existing pool light (be sure to keep the screws in a safe place) and bring the lights at least a meter away from the surface edge of the pool and on to a towel to be safe.
• Cut the cable as close to the existing light as close as possible. 
• Wipe down everything (including your hair!) to prevent water from dripping into exposed wires before you strip and connect the new lights according to the included instructions. 
• Test the pool light, coil the cable to the rear of the light and re-mount back into the pool. 
• Don’t forget to re-set your pool timers.